Products >> Thinners, Solvents, Etch & Cleaners

NAPCO All Purpose Thinner

NAPCO All Purpose Thinner is a blend of several extra pure thinners (reducers) specially formulated for product compatibility and optimum performance when used with NAPCO Poly-Glass™ topcoats and NAPCO Primers. This medium speed formula will help provide high quality and maximum gloss in most climactic conditions. Cheaper brands contain up to 10% water, which is not compatible with solvent-based primers and polyurethanes - resulting in hard to repair solvent popping.

Don't short-change the importance of choosing the right thinner for your Poly-Glass™ topcoats and NAPCO Primers. The chemistry of thinners is critical to your success. Using a cheap thinner that is too "hot" can result in solvent popping. On the other hand, a thinner that is too slow can cause lots of hard to repair runs and sags, practically ruining your hard work. When you care enough about your work to choose the best quality resin and topcoat, shouldn't you use the best thinner to go with it? NAPCO All Purpose Thinner is a proven winner!

NAPCO Isopropyl Alcohol - 100%

Keep a supply of NAPCO Isopropyl Alcohol on hand for cleaning those more delicate surfaces that cannot be cleaned with NAPCO Overspray & Gun Cleaner. You can use it to clean paint stains off of wallpaper, carpet and other fabrics. It's also terrific for cleaning and sterilizing masks, plastic face shields and goggles.

NAPCO Isopropyl Alcohol is stronger than cheap "rubbing alcohol" found at chemists. It's 100% pure. When using it to clean delicate surfaces, be sure to test it in a small inconspicuous area first for fitness. Some fabrics may fade.

NAPCO Overspray & Gun Cleaner

NAPCO Overspray & Gun Cleaner is a must have item to stock in every work vehicle, because it's invaluable for:

• cleaning overspray on unpainted hard surfaces (tile, glass, ceramics, etc)
• cleaning your spray gun
• eliminating silicone contamination in the prep process

The powerful solvents in NAPCO Overspray & Gun Cleaner will do triple duty for you - what other product in your work vehicle can do that? Using Overspray & Gun Cleaner will drastically change the quality of your work - your cleaner gun will give you a smoother glossier finish and the elimination of silicone contamination will practically make fish eyes and the resulting call-backs a thing of the past.

Substituting with cheap thinner just won't cut it. Get some Overspray & Gun Cleaner today and take your work to a higher level!

Because NAPCO Overspray & Gun Cleaner is such a powerful product, it can melt certain types of plastic products. Protect delicate surfaces when using this product.

NAPCO Quick Clean Gun Cleaner

NAPCO Quick Clean Gun Cleaner is a must have item for your shop. Maintaining a clean spray gun is essential for providing the smooth and glossy finish your customers expect.

In the past, cleaning the spray gun was a nasty, labour intensive job. Not any more! NAPCO Quick Clean Gun Cleaner is a super strong solvent that can tackle your hardest to clean spray gun with minimal effort. It's so easy to use - just soak the gun for a couple of hours (virtually no scrubbing required), rinse and go! It quickly and easily melts away even the toughest caked on paint.

The 5 gallon pail comes with a convenient, easy to use dipping basket.

Weak solvents, such as thinners, can't properly clean a spray gun. NAPCO Quick Clean Gun Cleaner cleans guns faster, better and with less effort than other weaker solvents. It's the spray gun cleaner of choice in NAPCO's own gun repair and maintenance shop.

NAPCO Scented Options

NAPCO Scented Options easily and inexpensively mask unpleasant paint and solvent smells. This greatly reduces complaints in densely occupied buildings where ventilation is not an option, such as hotels, apartment buildings, schools, office buildings, restaurants, nursing homes and hospitals. It's a fast, safe and effective solution to a common objection.

NAPCO Scented Options are available in 6 great "flavours":

• Bubble Gum
• Cherry
• Lemon
• Pine
• Spice
• Wintergreen

NAPCO Scents are compatible with any NAPCO primer or topcoat.

NAPCO Silicone Digestor

NAPCO Silicone Digestor works by "eating" silicone contamination, not just melting silicone and spreading it around as other products on the market do.

Silicone is one of the world's most stubborn substances - it even manages to stand up to acids! Neither conventional scraping nor products that only melt silicone can easily remove all traces of silicone from the caulk line. Only NAPCO's Silicone Digestor works easily and effectively to eradicate those hard to repair fish eyes caused by silicone contamination.

It's so easy to use - just dab a little on the silicone "skin" along the caulk line and let Silicone Digestor do the hard work for you. Achieving a smooth, blemish-free finish has never been easier!

NAPCO Fish Eye Eliminator

Silicone, grease, fingerprints, silicone caulk residue and other unwanted contaminants product unattractive gaps in the surface of the topcoat that are commonly referred to as "fish eyes". You do a great job cleaning and prepping the fixture, but sometimes you just can't seem to eliminate all of those hard to see contaminants.

NAPCO Fish Eye Eliminator takes care of those hard to spot contaminants, providing you with the smooth and professional look your customers will appreciate. Don't waste time going back the next day to repair your work - do it right the first time with NAPCO Fish Eye Eliminator!

NAPCO Fish Eye Eliminator is compatible with all NAPCO primers and topcoats. Use it and see a visible difference in the quality of your work.

NAPCO Poly-Cleaner

Preparation is "half the battle" for the challenge of refinishing. Ensure a smooth and long lasting finish by cleaning the surface with NAPCO Poly-Cleaner.

This phosphoric acid-based detergent emulsifies dirt and removes mould, mineral deposits and even stubborn soap scum. Using Poly-Cleaner before etching provides a grime and contaminant-free work area and saves you scrubbing time.

Poly-Cleaner is safe for use on any non-painted surface prior to resurfacing: bathtubs, wash basins, countertops, cabinets, wall tile, fibreglass, acrylic, cultured marble, porcelain, steel, marble and even china toilet bowls.

NAPCO Low Odour Stripper

We have proudly eliminated the most unpleasant aspect of stripping a bathtub - the noxious odour! NAPCO Low Odour Stripper does the same job as our Super Orange Stripper, in almost the same amount of time. It's strong and effective, while providing you with a healthier work environment.

NAPCO Low Odour Stripper bubbles off even the most durable coatings in only 10 to 15 minutes - saving time, money and aggravation. Breathe a little easier - order our Low Odour Stripper for your next job!

NAPCO Low Odour Stripper can be used effectively on porcelain, ceramic, steel, china and glass surfaces.

NAPCO Low Odour stripper must not be used on plastic, acrylic, Formica or fibreglass surfaces, due to the high risk of melting these types of surfaces.

Even though Low Odour Stripper has much less odour than other strippers, proper protection (respirator mask or fresh air breathing system, goggles and heavy duty gloves) must be used when applying this product.

NAPCO Extra Strong Etch

This super powerful formula effectively de-glosses those harder to etch surfaces, like coloured tubs and tile, in record time. No more standing around wasting precious time on the jobsite, waiting for the etch to work. Extra Strong Etch gives you a porous surface that your primer and topcoat can grab on to every time.

NAPCO Etch can be used effectively on porcelain, ceramic, steel, china and glass surfaces.

Contact Us

All our products are sourced to give you the best prices in a one stop shop, delivered to your door. If we don’t have something you frequently purchase, please let us know.

Contact us to request a full product guide.